Canon IMAGECLASS MF7400 - Manual (Page 13)


Connect the Power Cord and Turn On the Machine
1
Connect the supplied power cord (A) in to the socket and
the wall outlet.
2
Press the main power switch to “I” side.
The Start Up screen is displayed until the machine comes
to the ready mode.
The Basic Features screen is displayed when the machine
is ready to scan.
<Close the left or front cover.> is displayed:
Make sure that the left or front cover is closed properly.
(See “Install Cartridge,” on p. .)
<Load paper.> is displayed:
Make sure that paper is loaded in the machine. (See “Load
Paper,” on p. 8.)
<Insert the toner.> is displayed:
Make sure that the cartridge is installed properly. (See
“Install Cartridge,” on p. .)
●
●
●