Canon IMAGECLASS MF7400 User Manual
Page 24
Advertising
6
Press [IP Address Settings].
7
Press [IP Address], then enter the IP address
using - (Numeric Keys).
If you specify an IP address using DHCP, BOOTP, or RARP,
press [DHCP], [BOOTP], or [RARP]. One of the DHCP, BOOTP,
or RARP settings can be selected at any one time.
8
Press [Subnet Mask] and [Gateway Address] and
specify the settings in the same way.
9
Press [OK].
10
Press the main power switch on the right side
of the machine to “ ” side, wait at least 0
seconds, and then press the main power
switch to “I” side.
Advertising