Cabletron Systems WPIM T1 - Manual (Page 17)

WAN Protocols
WPIM-T1/DDS User’s Guide 1-3
1.3 WAN PROTOCOLS
The module in which the WPIM-T1/DDS is installed supports the
following WAN protocols (refer to the Release Notes included with the
host MIM or standalone hub for a list of current protocols):
• Point to Point Protocol (PPP) and as defined by RFC 1661
• Frame Relay as defined by RFC 1490
• ISDN as defined by Q.921 and Q.931
1.4 MIB SUPPORT
Refer to the Release Notes included with the host platform for a list of all
MIBs supported by the WPIM-T1/DDS. For information about how to
extract and compile individual MIBs, contact Cabletron Systems (refer to
Getting Help ).
NOTE
A connection can only be chosen for either T1 or DDS service
in Local Management. Both services cannot operate at the
same time.