tekmar 483 tN4 Gateway - Manual (Page 11)

11 of 20 © 2011 D 483 - 12/11
Scenes
Scene Overview
Select the scene or building override that you want the
building to operate at. For example, the scene could be set
to Normal while the building is occupied, and then set to
away while the building occupants are away on vacation.
Setpoint controls that are using the setpoint device enable
feature can be activated or placed in standby operation
using the scenes page. Click on the Active button to have
the setpoint control operate at the Occupied temperature
setting. Click the Standby button to have the setpoint control
operate at the standby setting. The standby temperature
setting is set by the application mode configured on the
setpoint control.
Scene Details
Click on the Details link to view the response of each
thermostat in a particular scene.
The thermostat response for Scenes 1, 4, 5, 7, and 8 are
configurable. Possible responses are as follows:
Schedule
the device operates on its regular
schedule.
Occupied
the device operates at the occupied
temperature and ignores any schedule.
Unoccupied
the device operates at the unoccupied
temperature and ignores any schedule.
Wake
the device operates at the wake
temperature and ignores any schedule.
Sleep
the device operates at the sleep
temperature and ignores any schedule.
Away
the device operates at the away
temperature and ignores any schedule.
Select the desired temperature for each thermostat by
clicking on the drop down menu and then click the upload
button.
The thermostat response for Scenes 2, 3, and 6 are factory
set and are not configurable.
Schedules
Schedule Overview
The overview page lists the schedules on the tekmarNet
®
system, the location of the schedule master thermostat,
and the thermostats that are members of this schedule.
Scene Overview
Scene Details
Schedule Overview