Coleman 5110 - Manual (Page 21)

Ц Ц Assemble the Electrode
Wires and the Battery to the
Electrode Module.
Note: The fuel hoses are not
shown in this step, for
simplicity.
16-A
Side Burner Wire
9-Volt Battery
Top Burner Wires
Electrode Module
16-A. Slip the Top Burner Wires through the
large hole in the Top Panel.
Ц Ц Slip the Side Burner Wire through the
large hole in the Left Panel.
Ц Ц Assemble the 9-Volt Battery to the
Electrode Module.
Note: The polarity is marked on the Electrode
Module.
Step
16
21
16-B
Electrode Module
Igniter Button Wires
(Note: Large Tabs)
9-Volt Battery
Side Burner
Electrode Wire
T
EST THE
I
GNITER
:
A SPARK SHOULD APPEAR AT
ELECTRODE TIP
.
I
F THE SPARK DOES NOT
APPEAR
:
-C
HECK THE WIRE
CONNECTIONS TO THE
MODULE
.
-C
HECK PROPER
ASSEMBLY OF FRESH
9-V
OLT BATTERY
.