Tweco AirCut 15C - Manual (Page 16)

Introduction 2-2 Manual 0-4965
AIRcut 15c
2.05 General Specification
Model Description 15C AirCut™
Maximum output 15 Amps
Input Voltage & Phase
120V,
Single Phase
Frequency 60Hz
Input power 2.2 kVA
Current Input fuse
U.S. / Canada 20
Amps
No Load Voltage 330V
Load Voltage 86V
Output Current 15 Amps
Post flow time 12 Seconds
Duty cycle @ 104°F /
40° C Ambient
30% @ 15A,
86vdc
Recommended Cutting
Capacity
1/8”
(3.2 mm)
Maximum Cutting
Capacity
1/4”
(6.5 mm)
Dimension (W * D * H)
6.5”x18”x9.5” (165
mm x 457 mm x
241 mm )
Gross Weight 30 lbs. (11.2 kg )
NOTE:
Refer to Local and National Codes or local au-
thority having jurisdiction for proper wiring
requirements.
2.06 Features
• COMPACT and LIGHT - Designed for easy
transportation.
• ENERGY EFFICIENCY - Advanced tech-
nology reduces power consumption.
• HIGH SPEED RECOMMENDED CUT-
TING - The constricted plasma arc provides
high speed cutting as well as a good quality
genuine, narrow cut.
• LOW COST WITH COMPRESSED AIR
- The AirCut™ operates on its own com-
pressed air.
• ALL KINDS OF METALS - Useful for
most metals such as stainless steel, alumi-
num, mild steel, copper and their alloys.
• PILOT ARC IGNITION FROM TORCH
- The Pilot Arc ignites the cutting arc.
• POWERFUL CUTTING PERFORMANCE
- Recommended cutting capacity is 1/8”
(3.2 mm).
• ABLE TO CUT PAINTED MATERIALS
- Pilot Arc ignition allows the AirCut™ to
cut painted materials.
• EXTENDED PARTS LIFE - Consumable
parts life is longer.