Tweco 151 CutMaster - Manual (Page 28)

OPERATION 4-4 Manual 0-4668
G. Set Operating Pressure
1. Place the Power Supply RUN / Rapid Auto Restart / SET switch to the SET (down) position. Gas will flow.
Art # A-04254
1 2
2. Adjust gas pressure per the settings chart.
Leads
Length
SL100™
(Hand Torch or
Machine Torch)
Up to 25'
(7.6 m)
70 psi
4.8 bar
Over 25'
(7.6 m)
75 psi
5.2 bar
CutMaster™ 151
Gas Pressure Settings
Art #A-03793
70 - 75 psi /
4.5 - 5.2 bar
Pressure Control Knob /
Bouton De Contrôle
de Pression