F. power on, G. set operating pressure – Tweco 38 CutMaster User Manual
Page 25
Advertising
Manual 0-2888
4-5
OPERATION
F. Power On
Place the Power Supply ON / OFF switch to the ON (up) position. AC indicator
turns on.
A-03384
A
30
20
26
28
24
22
G. Set Operating Pressure
Place the Power Supply RUN / SET switch to the SET (down) position. Gas will flow. Adjust gas pressure to 65
psi / 4.5 bar. Gas indicator
turns on.
NOTE
If gas regulator leaks, reset gas pressure to 0 psi,
then reset to 65 psi / 4.5 bar.
A-03385
A
30
20
26
28
24
22
A-03389
1
2
65 psi / 4.5 bar
Advertising