06 declaration of conformity, 06 declaration of conformity -6, Drag-gun plus 35c – Tweco 35C Drag-Gun Plus User Manual
Page 11
DRAG-GUN PLUS 35C
GENERAL INFORMATION
1-6
Manual 0-4750
1.06
Declaration Of Conformity
Manufacturer:
Thermadyne Corporation
Address:
82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (European Council
Directive 73/23/EEC as amended by Council Directive 93/68/EEC) and to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the “EMC Directive” (European Council Directive 89/
336/EEC) and to the National legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
•
CSA (Canadian Standards Association) standard C22.2 No. 60 for Arc Welding Equipment.
•
CENELEC EN50199 EMC Product Standard for Arc Welding Equipment.
•
IEC/EN 60974-1 (EN50192) (EN50078) Arc Welding Equipment Part 1: Welding Power Supplies
•
IEC/EN 60974-5 Arc Welding Equipment Part 5: Wire Feeders
•
IEC/EN 60974-7 Arc Welding Equipment Part 7: Torches
•
IEC/EN 60974-10 Arc Welding Equipment Part 10: Electromagnetic Compatibility (EMC) Requirements
•
For environments with increased hazard of electrical shock, Power Supplies bearing the S mark conform to EN50192 when used in
conjunction with hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
•
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing process. This
is to ensure the product is safe, when used according to instructions in this manual and related industry standards, and performs as specified.
Thermadyne has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.
Manufacturers responsible representative:
Steve Ward
Operations Director
Thermadyne Europe
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX