Tweco PC250 - Manual (Page 3)

INTRODUCTION
This User’s Manual provides specific information about your Firepower PC250 Plasma Cutting System.
It provides pertinent information needed to safely and effectively operate your Firepower Plasma Cutting System.
The manual provides instructions on set-up, installation and actual use.
SAFETY
SAFETY PROFILE
Tradesmen respect the tools and equipment with which they work. They are also aware that tools and equipment
are dangerous if used improperly or abused.
Read this manual prior to using your Firepower machine. It will enable you to do a better and safer job. You will
also learn the machine’s application, limitations and the potential hazards specific to plasma cutting.
SAFETY INFORMATION
The following safety information is provided to you as a guideline. Use it to operate your new Firepower Plasma
Cutting System under the safest possible conditions. Any equipment that uses electrical power is potentially
dangerous to use when the safety or safe handling instructions are not known and/or are not followed. This
safety information gives you the necessary information for safe use and operation.
Items in this manual that significantly affect safety are identified with the following headings. Please read and
understand this manual. Pay special attention to items identified with these headings.
- Means there is a possibility of injury or death to yourself or others if the proper
safety precautions are not followed.
- Means there is the possibility of damage to the Firepower System or other
property.
- Indicates points of interest for more efficient and convenient installation or operation.
It may be used before or after a procedure to highlight or better explain the step.
READ ALL SAFETY AND WARNING INSTRUCTIONS CAREFULLY before attempting to install, operate or
service this machine. Your failure to comply with the instructions could result in personal injury and/or property
damage.
RETAIN THESE INSTRUCTIONS FOR YOUR FUTURE REFERENCE.
SAFETY SYMBOLS
Please familiarize yourself with the warning symbols listed on the following pages. These symbols identify
important safety messages in this manual. When you see one of these symbols, be alert to the possibility of
personal injury and carefully read the message that follows.
Indicates that the possibility of electric shock hazard exists during the operation of the step(s) that
follow.
Indicates that the possibility of fire hazard exists during the operation of the step(s) that follow.
3
ƽ WARNING
ƽ CAUTION
NOTICE
ƽ IMPORTANT ƽ