Canon VendaFax VF-1 User Manual

Page 4

Advertising
background image

Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693

Factory: 21B Squires St. Cortland, NY 13045 607-428-0627




If you purchased a VENDAPIN 5596, simply connect the supplied harness to J-10 3-position and 2-
position headers. See the photo below.

All the electrical connections are complete for the VENDAPIN 5596. For competitive vend devices,
please refer to the following section for proper interfacing.


If you are using another type of machine, the final termination points are to be supplied by the
Manufacturer of that machine. In other words, you will need to know where to get +24Vdc and
Ground, where to get an Enable signal, and where to connect the Count circuit for that specific
machine. Please refer to the wiring table below for specifications.

Pin 1 - +24Vdc - Yellow
Pin 2 – Ground - Black
Pin 3 – Enable - +5Vdc ONLY - Orange
Pin 4 – Enable DC return - Blue
Pin 5 – Count In (+5Vdc only with at least 1K current limiting resistor) - Red

Advertising