Craftsman 0220 - Manual (Page 15)


4.5 Insert the Hand Crank into the jack’s Hand Crank Coupler Plate at the rear of
the Trailer (as shown).
With the right side of the Trailer resting on the Assist Wheel, you can now unfold the
Trailer.
4.4 Remove the Hand Crank (Ab) from the clips just inside wall of the Trailer.
Note: You may need to remove the Gate/Ramp to access the Hand Crank from the
insde wall of the Trailer.
4.6 Turn the Hand Crank counter-clockwise to unfold the Trailer. Continue
turning the Hand Crank until you cannot turn it any further.
Hand Crank Coupler Plate
Hand Crank
WARNING
Watch for pinch points while folding and deploying trailer as
serious injury could occur.