Folded trailer warning pinch point warning, Warning – Craftsman 0220 User Manual

Page 9

Advertising
background image



Folded Trailer Warning

Pinch Point Warning

4

Coupler, load Weight and distribution and electrical

Connections

Loads can suddenly move or topple, which can result in death or serious injury.

Overloaded trailers and improper tongue weight can result in loss of control of the

trailer. Ensure the trailer is coupled correctly and the chains are crossed over each other.

Ensure the load is tied securely and doesn’t exceed the Gross Vehicle Weight (GVW).

Ensure the electrical connections are tightly fitted and functioning properly. Always

check brake lights and turn signals before each tow.

5

Always use the

Hand Crank

when folding

and deploying

Trailer. Ensure

others keep a safe

distance to avoid

any potential

pinch points.

6

You can store

the Trailer in

folded position,

but do NOT tow

the Trailer while

it’s folded. The

Trailer may tip

over resulting in

property damage,

serious injury or

death.

WARNING

NEVER tow

Trailer while in

folded position.

Failure to heed this

warning may void

warranty and could

result in property

damage, serious

injury or death.

Part #1024837

NEVER tow

Trailer while in

folded position.

Failure to heed this

warning may void

warranty and could

result in property

damage, serious

injury or death.

Part #1024837

Re-order #1031540

Part #1025112

Watch for pinch

points while

folding or

deploying trailer

as serious injury

could occur.

WARNING

WARNING

ADVERTENCIA

Uncoupling will cause trailer to come loose from tow vehicle. You must:

1. ChECk that ball load rating is same or greater than coupler load rating.

2. ChECk that ball size is same as coupler.

3. ClosE CoUplER ClAmp on ball.

4. lIfT coupler upwards to test that it will not separate from ball.

5. loCk coupler clamp with pin or padlock.

Attach hooks to tow vehicle

Always use safety chains.

Chains hold trailer if connection fails. You must:

1. CRoss chains underneath coupler.

2. AlloW slack for trailer to turn.

3. ATTACh chain hooks securely to tow vehicle frame.

Enough slack

for turns

El desenganche hará que el remolque quede suelto del vehículo remolcador. Usted deberá:

1. VERIfICAR que la CApACIDAD DE CARGA de la bola sea igual o mayor que la

CApACIDAD DE CARGA del enganche.

2. VERIfICAR que el tamaño de la bola sea igual que el enganche.

3. CERRAR el ToRNIllo DEAjUsTE DEl ENGANChE sobre la bola.

4. lEVANTAR el enganche para probar que no se separe de la bola.

5. CERRAR el tornillo de ajuste del enganche con un gancho o candado.

Utilice siempre cadenas de seguridad. las cadenas

sostienen el remolque en caso de que la conexión falle.

Usted deberá:

1. CRUzAR las cadenas por debajo del enganche.

2. pERmITIR que las cadenas queden flojas para que

el remolque pueda girar.

3. sUjETAR de forma segura los ganchos de la

cadena a los bordes del vehículo remolcador.

Suficientemente

flojo para poder

girar

Cruzar las cadenas

DIsCoNNECTED

CoNNECTED

DEsCoNECTADAs

CoNECTADAs

Una carga impropia puede causar que el remolque se tambalee o que

repentinamente pierda el control. Usted deberá:

• Asegurar que el peso de la carga más el peso del remolque no exceda la

capacidad del remolque (Clase de peso del Vehículo).

• Cargar los elementos más pesados en la parte delantera de las ruedas.

• Cargar de forma equitativa de lado a lado.

• Asegurar la carga al remolque.

sujetar los ganchos al vehículo remolcador

Cross chains

lights can prevent trailer from being hit by other vehicles.

You must:

1. CoNNECT trailer and tow vehicle electrical connectors.

2. ChECk all lights: tail lights, turn signals, and brake lights.

3. Do NoT ToW if lights are not working.

las luces pueden prevenir que otros vehículos choquen el

remolque. Usted deberá:

1. CoNECTAR los conectores eléctricos del remolque y del

vehículo remolcador.

2. VERIfICAR todas las luces, las luces traseras, las luces

de guiño, y las luces del freno.

3. No UTIlICE El REmolqUE si las luces no funcionan.

Improper loading can cause trailer sway and sudden loss of control. You must:

• Ensure weight of load plus trailer weight does not exceed trailer’s capacity

(GVWR - Gross Vehicle Weight Rating).

• load heavier items in front of wheels.

• load evenly side to side.

• secure load to trailer.

less load in rear

secure load to trailer

Balance load side to side

Asegurar la carga

al remolque

Balancear la carga de lado a lado

menos carga sobre la

parte posterior de las

ruedas

más carga sobre la parte delantera de las ruedas

more load in front of wheels

open

Abierto

Closed

Cerrado

pin or padlock

In place

lift coupler to check

Colocar el candado o

gancho

Levantar el enganche para verificar

#1031540

WARNING

ADVERTENCIA

WARNING

ADVERTENCIA

WARNING

ADVERTENCIA

Advertising