Tweco 211i Thermal Arc Fabricator User Manual
211i operating manual, Fabricator, 3 in 1 multi-process welding system
Advertising
Table of contents
Document Outline
- 211i FABRICATOR
- SECTION 1: SAFETY INSTRUCTIONS AND WARNINGS
- 1.01 Arc Welding Hazards
- 1.02 General Safety Information For Victor CS Regulator
- 1.03 Principal Safety Standards
- 1.04 Symbol Chart
- 1.05 Precautions De Securite En Soudage A L’arc
- 1.06 Dangers relatifs au soudage à l’arc
- 1.07 Informations Générales de Sécurité
- 1.08 Principales Normes De Securite
- 1.09 Graphique de Symbole
- 1.10 Declaration Of Conformity
- SECTION 2: INTRODUCTION
- 2.01 How To Use This Manual
- 2.02 Equipment Identification
- 2.03 Receipt Of Equipment
- 2.04 Description
- 2.05 Transportation Methods
- 2.06 User Responsibility
- 2.07 Fabricator 211i Portable System Package (Part No. W1004201)
- 2.08 Duty Cycle
- 2.09 Specifications
- 2.10 Optional Accessories
- 2.11 Volt-Ampere Curves
- SECTION 3: INSTALLATION, OPERATION AND SETUP
- 3.01 Environment
- 3.02 Location
- 3.03 Ventilation
- 3.04 Electricity Supply
- 3.05 Electromagnetic Compatibility
- 3.06 Victor Regulator
- 3.07 Leak Testing The System
- 3.08 When You Finish Using The Regulator
- 3.09 Storage Of The Regulator
- 3.10 Fabricator 211i Power Source Controls, Indicators And Features
- 3.11 Attaching the TWECO Fusion 220A MIG Gun
- 3.12 Installing 33/44 lb Spool (12" diameter)
- 3.13 Installing 12.5 lb Spool ( 8" diameter)
- 3.14 Installing 1 lb Spool (4" diameter)
- 3.15 Inserting Wire Into The Wire Feed Mechanism
- 3.16 Feed Roller Pressure Adjustment
- 3.17 Changing the Feed Roll
- 3.18 Wire Reel Brake
- 3.19 Setup For MIG (GMAW) Welding With Gas Shielded MIG Wire
- 3.20 Setup For MIG (FCAW) Welding With Flux Core (Gasless) Wire
- 3.21 Setup For SPOOL GUN MIG (GMAW) Welding With Gas Shielded MIG Wire
- 3.22 Setup For LIFT TIG (GTAW) Welding
- 3.23 Setup For STICK (SMAW) Welding
- SECTION 4: BASIC WELDING GUIDE
- SECTION 5: POWER SOURCE PROBLEMS AND ROUTINE SERVICE REQUIREMENTS
- SECTION 6: KEY SPARE PARTS
- APPENDIX 1: FABRICATOR 211i CIRCUIT DIAGRAM