Tweco PWH-M 2A - Manual (Page 18)

Installation 2-2 Manual 0-2005
3) Feed the end of the leads with the torch fittings
through Items 4, 3 and 2 connect to the torch,
matching the color coded lead to the color coded
torch fitting. Do not overtighten.
4) Pass the sleeve adaptor through the nut and
screw onto the torch.
5) Slide the positioning tube onto the sleeve adap-
tor and secure with the nut (Item 2).
6) Connect the other end of the leads to the ap-
propriate fittings on the plasma welding con-
sole.
Check the instructions for the other components of the
welding system to insure they are installed properly.