Tweco SP 2001 Spool Gun - Manual (Page 14)

Power Source Compatibility:
The SP-2001 Spool Gun must be used with a DC
type power source. The DC type power source can
have a CC or CV output; however, best results are
obtained with a CV output.
WARNING: When using the SP-
2001 Spool Gun with a CC output
power source, the filler metal will
be at welding voltage any time
the power source is turned ON.
Filler metal contact to the work-
piece will cause a welding arc.
The SP-2001 Spool Gun must be used in conjunc-
tion with a control box (not included with the SP-
2001 Spool Gun package). This control box which
connects to the power source may require an adapt-
er cable. Consult the control box owner’s manual for
details.
430429-287
DESCRIPTION OF EQUIPMENT
3-2 April 6, 1998 Revised