VICI D-4-I-SH17-R - Manual (Page 7)

3
Components of the Detector System
Detector system components are listed in Table 1. Check the contents of the packages to
verify that everything is present. Contact the factory if anything is missing or damaged.
(NOTE: damaged shipments must remain with the original packaging for freight company
inspection.) Table 2 lists additional items which must be purchased from Shimadzu.
Introduction
Description Quantity Product number
Detector cell, PDHID 1 PD-D4-I-RU
Pulse supply module 1 PD-M2
Instruction manual 1 MAN-PDD4-SH17
Fittings kit 1 PD-KIT-D4
Includes: 1/32" polyimide ferrule 5 ZF.5V
1/32" polyimide plug ferrule (no through hole) 1 ZF.5VX
1/16" gold-plated ferrule 5 ZF1GP
0.25 - 0.44 mm polyimide column ferrule 5 FS.4
0.4 - 0.5 mm polyimide column ferrule 5 FS.5
1/16" union, 316 SS 2 ZU1MS6
1/16" tee 1 ZT1
1/8" external to 1/16" internal adapter 2 EZR21
1/8" external to 1/16" internal reducing union 2 EZRU21
1/32" external nut 1 EN.5KN
Fused silica adapter (installed) 1 IZERA1.5
Packed column adapter 1 I-23642-D4RU
Restrictor, 30 cc/min @ 60 psi He 1 TGA-R-30F60P
Helium purifier 1 HP2
Electrometer cable assembly, Shimadzu 1 I-23230-SH
Bias cable assembly, Shimadzu 1 I-23404-SH
Pulser power supply 1 I-23569-1
Heater block assembly, Shimadzu 1 I-23831A
Table 1: Components of the D-4-I-SH17-R system
Description Quantity Product number
For GC-17
Mounting base screws 2
Heater assembly (depending on requirement) 1
120V 221-43346-91
220V 221-43346-93
Electrometer, FID wide range (see page 12) 1 221-43290-91
For GC-2010
10 mm spacers, BSU-410 2 037-38871-72
FID-2010 heater assembly, 220-240V 1 221-47660-98
FID-2010 controller 1 221-46520-91
For GC-2014
10 mm spacers, BSU-410 2 037-38871-72
FID-2014 heater assembly, 220-240V 1 221-70610-34
FID-2014 controller 1 221-46520-92
Table 2: Components not supplied by Valco (may be obtained from Shimadzu)