Vixen AGA-1 User Manual
Page 11
If it is finished correctly, the indicator will stop blinking and will
remain lit.
Now you can go to the next mode.
If there is something wrong, the indicator will light up in red.
! ! !
2. Correcting the instruments
If the drive check indicator is red, make sure that the following
conditions exist:
♎!
The right ascension and declination is set accurately on the
monitor screen.
♎!
The motor drive speed is selected correctly.
♎!
The telescope is balanced properly on the right ascension
and declination axes.
♎!
The motor cables are connected securely.
♎!
The right ascension and declination clamps are fastened.
♎!
The gear wheels of the slow-motion control shaft and motor
are set to engage each other properly.
After checking, begin with the Level Check mode again.