Canon LV-7320U - Manual (Page 20)

20
BASIC OPERATION
ADJUSTING THE IMAGE
The message disappears after 4 seconds.
The message disappears after 4 seconds.
ZOOM ADJUSTMENT
1 Press the ZOOM WIDE/TELE button(s) on the Top Control or
the ZOOM
▲ / ▼ button on the Remote Control Unit to turn into
the ZOOM mode.
2 Press the ZOOM WIDE button or the ZOOM ▲ button to make
the image larger, and press the ZOOM TELE button or the
ZOOM
▼ button to make the image smaller.
FOCUS ADJUSTMENT
1 Press the FOCUS ▲ / ▼ button(s) on the Top Control or on the
Remote Control Unit to turn into the FOCUS mode.
2 Adjust the focus of the image by pressing the FOCUS ▲ / ▼
button(s).
KEYSTONE ADJUSTMENT
1 Press the KEYSTONE button on the Top Control or the
KEYSTONE
▲ / ▼ button on the Remote Control Unit or select
the Keystone on the SCREEN menu. (Refer to page 28, 29.)
The message “Keystone” is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
▲ / ▼ button or the POINT UP/DOWN button(s). Press the
KEYSTONE ▲ button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE ▼ button or
the POINT DOWN button to reduce the lower part. The message disappears after 4 seconds.
Reduce the upper width with the KEY STONE ▲
button or the POINT UP button.
Reduce the lower width with the KEY STONE ▼
button or the POINT DOWN button.
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function. Refer to page 28 for the
Digital Zoom operation.
Zoom
Focus
Keystone
If the picture has keystone distortion, correct image with KEYSTONE adjustment.