Canon LV-7320U - Manual (Page 25)

25
COMPUTER MODE
The number of the total vertical lines. Adjust the number to match
the image of your personal computer.
Total lines
Recalls the parameter data that was previously
adjusted. Reset
Stores the parameters in the memory. Stored
Clears the parameter data previously set . Mode free
Closes the PC ADJUST Menu. Quit
The number of the total dots in one horizontal period. Adjust the
number to match the image of your personal computer.
Total dots
Adjustment of the horizontal or vertical picture position. When the
image is not centered on the screen, adjust each of those items.
Horizontal / Vertical
Adjustment of the clamp level. When the image has a dark bar(s),
try this adjustment.
Clamp
Adjustment of the area displayed with this projector. Select the
resolution at the Display area dialog box, or adjust the number at
the column of “H” or “V” to match the resolution of the image.
Display area
Set “On” to resize the image with 4 x 3 aspect ratio to fit the
screen.
Full Screen
Each of the keys operates as follow.
Press the
SELECT button
to select the
typical resolution
of the image.