Wi Digital Systems Wi-AudioLink User Guide - Manual (Page 18)

Ready, Charge, Go!
Before using your new Wi AudioLink digital wireless, you need to
fully charge the batteries for approximately 2 hours.
Charging
1. Plug the AC Charger into a power socket.
2. Connect the USB Y-Split power cable to the USB port on the AC charger.
3. Connect one of the two mini USB connectors into the transmitter USB port.
4. Connect the second mini USB connector to the receiver USB port.
5. The Power/Status LED will turn to solid Red ON.
6. When charging is complete the Red LED will turn OFF.
7. Remove the charging cable and adapter and store in the carrying case.
The battery will last 4 to 6 hours of continuous operation.
POWER
LINK
AC Charger
USB Port
Mini USB
Connector
USB Port
USB Connector
GETTING STARTED
Wi AudioLink
18