Wi Digital Systems Wi-AudioLink User Guide - Manual (Page 29)

Connecting Headphones and In-Ear Professional Personal Monitors!
PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).
1.
Connect the 1/8” stereo connector end of your headphones or In-Ear
personal monitor into the “Audio Output” jack on the receiver.
2. Route the audio cable beneath the belt clip as shown to prevent
accidental disconnection of the cable.
3. Turn ON the receiver by pressing and holding the POWER
button on the receiver for 2 seconds.
F The Power Status LED on the receiver will show Solid Green LEDs.
F The flashing Green LED on the transmitter will turn to Solid Green
indicating communications between the transmitter and receiver are established.
RECEIVER CONNECTION
Wi AudioLink
29
v
Audio Output Jack
In-ear Personal Monitors
v
(Rx)
Belt Clip
Audio Cable