Pairing, Pairing the wi audiostream el, Pk z v – Wi Digital Systems Wi-AudioStream EL User Guide User Manual
Page 28
Wi AudioStream EL
28
PAIRING
Pairing the Wi AudioStream EL
Before using the Wi AudioStream EL, you will need to pair the Transmitter with the
Receiver. Pairing will allow a connection between the Transmitter and the Receiver.
1.
First turn ON the Transmitter (Tx) and the Receiver (Rx) by pressing and
holding the POWER button , on each of the units for 2 seconds.
2.
Press and hold the LINK button on the Transmitter (Tx) for 3 seconds.
The Power/Status green LED on the Transmitter will start flashing.
The Transmitter is now in a Pairing mode and ready to search for receivers.
3.
Press and hold the LINK button on the Receiver (Rx) for 3 seconds.
The Power/Status green LED on the receiver will flash momentarily.
4.
Once the Transmitter pairs with Receiver, the Power/Status LED on both
devices will turn to solid green.
5.
The Wi AudioStream EL Transmitter and Receiver are now ready for use.
(Tx)
p
k
z
v
(Rx)
p
k
z
v
r