Wi Digital Systems Wi-AudioStream EL User Guide - Manual (Page 31)

Wi USB Transmitter Connection
Connect the optional plug-and-play Wi USB Transmitter to your laptop
or desktop USB port upon restart. Your system is now ready to use.
No software or drivers required for this installation.
Receiver Connection
Press the LINK/VoIP button once on the Receiver to activate
the internal VoIP microphone. The Blue LED will turn ON.
Speak directly into the VoIP MIC to transmit. Always route
the audio cable beneath the Rx unit’s belt clip to prevent
accidental disconnection.
Built-in MIC
Wi AudioStream EL
31
VoIP MICROPHONE SETUP
PLEASE PROTECT YOUR EARS! Prolonged use of headphones or
In-Ear personal monitors at high volumes may affect your hearing
capacity or may result in noise induced hearing loss (NHL).
(Rx) LINK/VoIP Button
Wi USB Transmitter
Model JM-UST01
(Optional)