Wildview STC-TGL1 User Manual
Page 13
STC-TGL1
www.wildviewcam.com Toll Free 888-304-6125
13
In order to obtain proper weather resistance, please make
sure that both door latches are securely locked in place.
Testing the camera coverage area
One of Wildview Scouting Camera’s features is the ability to test
the coverage area.
•
After mounting the camera, open front housing and slide the
power switch to Test position. The front LCD will display the
word “tESt”.
•
Close the front housing.
•
Walk around in the front of the camera to see if you have
mounted camera in the proper position. A green indicator light
on the front will blink on when you have intruded the coverage
area.
•
Adjust the camera position as needed and repeat testing until
the desired coverage area is achieved.