Wildview STC-TGL1 User Manual
Page 9
Advertising
STC-TGL1
www.wildviewcam.com Toll Free 888-304-6125
9
in memory and utilize the SD memory. The front counter display
will show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only
show the number of images in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
•
Insert SD memory card in to the SD card slot completely and in
the correct direction as shown on the inside of the housing.
•
To remove the SD memory card, depress the SD card and pull
out the card gently.
SD cards must be clean (no images from other sources.)
Advertising