Winchester Repeating Arms 1200 (Historic Manual) - Manual (Page 8)

ALTERNATE WAY TO UNLOAD
1. Be sure safety is in the “ON” position (red band
on safety button will be hidden).
2. Turn gun until trigger guard is up.
3. Push carrier as far down as it will go.
4. Push the cut-off (the part which holds the shell
in the magazine tube) to the right. A shell will
pop out of the magazine. Repeat to remove
additional shell or shells.
5. With safety still in the “ON” position, slide the
forearm all the way to the rear. This will remove
the shell from the chamber.
CAUTION: Be certain magazine follower is
visible to make sure no shells remain in the magazine.
With the bolt all the way back, check chamber
to be sure it is empty.
6