Concord Camera Eye-Q 3340z - Manual (Page 40)

39
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1. Press the joystick when Restore Default is highlighted in the camera.
2. Press the joystick to select No or Yes.
When No is selected, no change is made.
When Yes is selected, the Default settings will be restored. Please refer to the table below
for the default settings.
OPTION DEFAULT STATUS
Capture mode Single Shot
Quality Fine
Resolution 2048 X 1536
Digital Zoom ON
Scene Selection OFF
White Balance Auto
Exposure Compensation 0
Auto Off 30 SEC
LCD Brightness Center
Speaker ON (Audio is an optional feature
available in some models only.)
Time Format 12 Hours
Note: After the camera is set to default, the Language, Date and Time menus will appear
when the camera is turned on.
Q
S
+
–
T