Exide Technologies Section 94.30 - Manual (Page 9)

INSTALLING THE AT10.1
5
PROCEDURE
To wall-mount the AT10.1, install
eight (8) 0.25in / 6.4mm bolts onto
the wall, rated to support the
AT10.1 weight plus a safety factor
of at least 2 times. Place the
AT10.1 on the bolts, add
appropriate mounting hardware,
and tighten securely. See the
diagram below for the Style-5017
enclosure footprint and wall-
mounting pattern. Dimensions are
in/mm.
Style-5017 Enclosure