SCANTECH ID (Champtek company) Pollux P-4010 - Manual (Page 17)

Installation 11
Powered USB (Product Number: 0114-S801121)
Powered USB
connector
Getting connected
To connect this scanner to your host system, follow the steps below:
1. Open the cable cap of this scanner.
2. Connect the desired interface cable to this scanner.
3. Close the cable cap.
4. Connect the interface cable to your host system.
2.3 MOUNTING
To mount this scanner, follow the steps below:
NOTE
Before fixing this scanner to your host system, connect the desired
interface cable to this scanner first (See section 2.2 Connecting).