SCANTECH ID (Champtek company) Pollux P-4010 - Manual (Page 18)

Installation 12
Standard package
1. Place this scanner on the inside of
your host system and mark the
places for the mounting holes. See
Appendix for this scanner
‟s
dimensions.
2. Drill the mounting holes in your
host system.
3. Fix this scanner on the inside of
your host system with screws.
Special package (with the fit plate)
1. Fix the fit plate to this scanner with
screws.
2. Attach this scanner to the scanner
stand of your host system.
Special package (with the High Stand)
Step 1: Locking the adjustable red bolt and fasten base stand with the base
plate clockwise.
Step 2: Remove the screw from the cable cap, detach the cap and insert the
interface cable, and then lock the cap up with screw.
Step 3: Assemble front and back cases with this scanner unit inside, put the
interface cable downward in back case‟s cable channel and then lock
the cases up with screw.
Step 4: Fasten this scanner unit with case with the stand.