LaMotte Tracer Dissolved Oxygen Meter - Manual (Page 13)

OPERATIONAL MATRIX
Function/Resulting
Action Power Mode Button Press
Sequence
On/Off On or
Off Any Momentary press of
ON/OFF button
Water Saturated Air
Calibration On Any Place electrode in
calibration cap. Press and
hold CAL/RECALL
button for 2 seconds
Zero Calibration On Any Place electrode in zero
solution. Wait for stable
reading. Press and hold
CAL/RECALL button for
2 seconds.
Store Reading On Any Momentary press of
MODE/HOLD button
Hold Release On Hold Momentary press of
MODE/HOLD button
Enter Memory Retrieval On Any Momentary press of
CAL/RECALL button
followed by a momentary
press of MODE/HOLD
button within 4 seconds.
Scroll Stored Readings On Memory
Recall Momentary press of
MODE/HOLD button.
Displays last in first out.
Exit Memory Retrieval On Memory
Recall Momentary press of
CAL/RECALL button
Clear Stored Memory On Any
Memory
Mode Press and hold the
ON/OFF button for 4
seconds. “clr” is displayed.
Change Measurement
Mode On Any Press and hold
MODE/HOLD button for
at least 2 seconds. Modes
will scroll by until button
is released.
13