LaMotte TRACER POCKETESTER TDS - Manual (Page 15)

15
Function/
Resulting Action Power Mode Key Press Sequence
Enter CON/TDS
Ratio On TDS
(ppm or
mg/L) Press and release
the CAL/RECALL
button twice in quick
succession.
Change CON/TDS
Ratio On TDS
(ppm or
mg/L) Press and release
the CAL/RECALL
button twice in quick
succession. Momentary
press of MODE/HOLD
button. Each press
increases ratio by 0.1
from 0.4 to 1.0.
Exit CON/TDS
Ratio On TDS
(ppm or
mg/L) Momentary press of
CAL/RECALL button.
Change
Temperature Units On n/a Press and hold CAL/
RECALL button then
momentarily press ON/
OFF button. Release
CAL/RECALL button
after“Self Cal” is
displayed.
Override Auto
Power Off On Any Momentarily press
CAL/RECALL button
then simultaneously
press and hold CAL/
RECALL and MODE/
HOLD buttons for 2
seconds until “oFF” is
displayed.
Default Reset Off n/a Simultaneously press
ON/OFF, CAL/
RECALL and MODE/
HOLD buttons
momentarily. “dFlt” will
be displayed.