LaMotte AT Visual Series Water Softener Demo Kit - Manual (Page 19)

19
Replacement Parts
Model AT-38 & AT-40
To order individual reagents or test components, use the specifi ed code number.
CODE DESCRIPTION CODE DESCRIPTION
1002 Model S Softener (AT-38)
*2218-G *pH, Wide Range Reagent, 25mL 1022 DuoSoft Softener (AT-40)
*4767-H *Soap Reagent #4, 60 mL 1028 DirectFLO Duo-Soft Softener
*4767-L *Soap Reagent #4, 500mL 0879 Precipitation Rack, acrylic
*4483WT-H *Hardness Reagent #5,60mL 0392 Pipet, plain, plastic, w/cap
*4483-L *Hardness Reagent #5, 500 mL 0670 Stopper, rubber, #6, for fl asks
4484-J Hardness Reagent #6 Tablets. 100 0655 Stopper, rubber, #3, for Hardness tube
4487WT-H Hardness Reagent #7, 60 mL 0651 Stopper, rubber 00, for Precipitation tubes
*4542WT-H *Precipitation Reagent A, 60 mL 0106 Test Tube, plastic, w/cap
*4542-L *Precipitation Reagent A, 500 mL 1101 Octa-Slide 2 Viewer
*4543WT-H *Precipitation Reagent B, 60 mL 3483-01 Wide Range, pH Octa-Slide 2 Bar, 5-10
*4543-L *Precipitation Reagent B, 500 mL *4450-G *Iron Reagent #1, 25 mL
0452 Flask, 250 mL, “HARD”, w/cap *4451-S *Iron Reagent #2 Powder, 4.5g
0453 Flask, 250 mL, “SOFT”, w/cap 0696 Spoon, 0.05g
0297 Test Tube, “HARD”, 15 x 120 mm, w/cap 4448-01 Iron Octa-Slide 2 Bar, 0.5-10 ppm
0298 Test Tube, “SOFT”, 15 x 120 mm, w/cap 2-2011 150 mL beaker
4488 Test Tube, Hardness, w/cap
*4485WT-H *Hardness Reagent #6, 60 mL
*4485-L *Hardness Reagent #6, 500 mL
*WARNING: Reagents marked with an * are considered
to be potential health hazards. To view or print a
Material Safety Data Sheet (MSDS) for these reagents
go to www.lamotte.com. To obtain a printed copy, contact
LaMotte by e-mail, phone or fax.