LaMotte AT Visual Series Water Softener Demo Kit - Manual (Page 8)

8
PROCEDURE B — Replacing the Media in the Softeners
With the aid
of a funnel,
add the fresh
media to the
column. Tap water may be
added to the media in
the funnel to facilitate
fi lling of the column.
Continue adding media to the
column until the resin is about 2”
from the top of the column.
Allow excess water
to drain from outlet
hose.
Clean threaded
area completely
and replace the
black plug in the
top of column.
DuoSoft Unit
To add the media in the bottom
chamber, turn unit upside down and
repeat Addition Steps 1-5. When
media has been added to both
chambers, proceed with Procedure A.
When using carbon media, it is
suggested that it be used in the top
chamber.
Unclamp outlet hose
and turn softener
upside down.
To replace media,
remove black plug
from the top of
dispenser.
2”
By adding more
water to the column and
shaking, the remaining
media can be easily
removed.
DuoSoft Unit
To remove the media in the bottom
chamber, turn unit upside down and
repeat Removal Steps 1-3. To add
new media, follow Addition Steps
1-5 for both chambers.
1. 2.
3. 4.
5. 6.
1.
3. 4.
2.
Allow exhausted
media and water to
run to waste.
ADDITION
REMO
VA
L