Specifications, Vl100, Specifications -3 – ClearOne DigiLinX User Manual
Page 92
ViewLinX
12-
3
All specifications subject to change without notification. All rights reserved. Copyright © 2008 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
ViewLinX. The wall plate will output simultaneously with the ViewLinX. This
can support upto 3 simultaneous component displays (1 from the VL, 2 from the
wall plate) or 2 simultaneous VGA displays (1 from the VL and 1 from the wall
plate). The wall plate also supports IR and RS-232 control for displays. The wall
plate is sold separately.
IR/RS232 Out. An IR emitter or an RS232 connection is used to control the
display.
Figure 12-2
VL9100-CS Commercial ViewLinX
Specifications
VL100
Standards Supported
NTSC, PAL
Video Output Connectors
Composite (480i, 576i)
S-Video (480i, 576i)
Component (480i, 576i, 576p, 720p, 1080i
VGA (up to 1024 x 768 @ 70Hz)
Audio Output Connectors
One S/PDIF output (PCM or Digital Bitstream)
Audio Input Connectors
One RCA Analog Input for accepting a TV
monitor
Gigabit Ethernet Connection
RJ45
XVO Connection
Dual RJ45 for Multimedia wall plate
Power Connection
Two-pin Phoenix connector (20-30VDC)
IR Emitter Outputs/RS232
One 3.5mm
IR Receiver Input
One 3.5mm
Auxiliary Output (IR/RS232)
One 3.5mm
LEDs
Signal detection, Power detection, Activity status
BNC Connectors for Video
Ethernet
Power
VGA
Sense
I/O
Audio
Balanced Audio
Multimedia port