ClearOne Connect Dante - Manual (Page 7)

CONNECT NETwOrk BridgEs QuiCk-sTarT guidE
10 11
refresh - Click the refresh button to update the information from the
CONNECT Dante unit.
link or Duplex indicator - Shows if a link is present on either the Primary
or Secondary port.
mAC Address - The Primary and Secondary MAC Addresses.
ip Address - The IP Addresses of each network port.
Dante Device Name - Name of the CONNECT Dante unit set by the
Dante Controller.
Channel Names - The fixed E-bus Channels (S through Z) and their
correlating transmit and receive channel names as set by the Dante
Controller .
versions - The Dante version information. Under the Dante Tab, connection information from the Dante network is
displayed.