ClearOne Converge 590 - Manual (Page 46)

46 Technical Services: 800.283.5936
To adjust Playback Audio Level (Volume)
1. Using the slider, adjust the volume. The meter will display output levels.
> Note: To save the name and setting of your playback device, refer to the Device
Toolbox Editor on page 54.
To open Recording Settings
1. Open the Record configuration window by clicking
on the Record device icon. The Record window
appears.
To adjust Recording Equalization
1. Adjust the the Low, Mid and High frequency
tones using the Equalization sliders.
To enable Recording Mute
1. Click the Mute button. The Mute indicator will
turn red when Mute is enabled.
To adjust Recording Audio Level (Volume)
1. Using the slider, adjust the volume. The meter
will display output levels.
> Note: To save the name and setting of your
recording device, refer to the Device Toolbox
Editor on page 54.
CAMERA CONTROLS
The Converge system provides voice tracking capabilities through a VISCA control port
connection to a PTZ camera.
SETTING CAMERA PRESETS
The camera presets are programmed in RAV-Ware and assigned to each microphone pod.
When a specific microphone is activated, the PTZ camera will move to the associated pre-
set camera position. The Converge 590 supports nine camera positions and a home posi-
tion. The Converge 560 supports six camera positions and a home position.
> Note: The PTZ camera can still be controlled manually from the camera or video
codec remote control.
To open Camera Controls
1. Click the Camera C Controls icon in the Configuration screen.