ClearOne Converge 590 - Manual (Page 56)

56 Technical Services: 800.283.5936
TO MUTE/UNMUTE MICROPHONES
1. Press to mute the microphones.
2. Press again to unmute the microphones.
> Note: This function mutes all microphones in the room.The mixer front panel LEDs
light red when the microphones are muted.
TO USE SPEED DIAL
1. Press and hold the assigned speed dial number on the dial pad.
> Note: You can dial numbers 1-9 by pressing and holding the assigned number. To dial
speed dial 10, press and hold 0.
TO REDIAL A PHONE NUMBER
1. Press .
> Note: REDIAL saves the last number that was dialed from the controller. Once REDIAL
is pressed, the phone will be taken off-hook and the number will be dialed.
TO DIAL A CALL FROM THE PHONEBOOK
1. Press on the controller.
2. Scroll to the entry and press .
> Note: The phonebook key will delete the
entire dial string if you press it for two
seconds. Pressing and holding the pound
(#) key for two seconds will insert a pause
into the dialing string. The duration of the
pause is two seconds.
TO USE THE STATUS KEY (RF CONTROLLER ONLY)
1. Press and hold for two seconds to
display the status of the Converge.
If the phone is not in use (on-hook) the
LCD will display the device name, the
date and time and the local number.
If the phone is in use (off-hook), the LCD
will display the call duration, the date and
time and the dialed number.
Conference
Sales Team
Product
Management
*
Dialing from the phonebook
ClearOne 55
10/13/04 14:33 PM
8013568518
On-hook status
11:14
10/13/04 14:33 PM
9795311468
Off-hook status