ClearOne ViewLinX - VL9300 - Manual (Page 8)

5 t
eChniCaL
s
upport
: 800.283.5936
s
urfaCe
M
ount
The same bracket used for a wall mounting over a wall box can be used to mount the VL9300 di-
rectly on a solid surface. When mounted on a flat surface all the I/O connections on the VL9300 are
accessible from the back of the unit as shown below.
Because the VL9300 is only 1-inch thick, and the cables exit out the back of the unit, it actually
takes less depth to plug a DVI cable into the VL9300 than to connect it directly to a connector in a
wall plate.
Vesa M
ount
The VL9300 mounting holes are positioned at 100x100 mm. This, along with the strong enclosure,
allows the VL9300 to mount directly to the back of a monitor, television or projector as long as the
monitor is compatible with the VESA 100x100 mounting standard. These are typically televisions or
monitors with a display size up to 36 inches, or a weight up to 45 lb. Different types of VESA mounts
may require extra hardware that is not included with the VL9300.