Software setup of the vl9300 – ClearOne ViewLinX - VL9300 User Manual

Page 9

Advertising
background image

i

nstaLLation

M

anuaL

6

Software Setup of the VL9300

The VL9300 is setup for use in the commerical or residential network using the StreamNet Dealer
Setup program and the acompanying StreamNet Dealer Setup manual. StreamNet Dealer Setup is
a PC-based program that allows you to configure devices so that they can communicate across a
StreamNet network. Phases of the software setup include:

Opening the existing project

Set sources for compression

Any video sources within the Network that will be viewed using the VL9300 decoder

»

(MLAV300 or MLAV9300-CS), must be in configured for compression using the
Sources Tab for those devices.














Find the new device

Matching the new VL9300 physical hardware device to the hardware setup in the project

Configuring the device with system-specific information

Saving the project

Sending the configuration files to the server


These steps involved in these processes are detailed in the DigiLinX Dealer Setup manual available
for viewing or download at www.netstreams.com.
Verify the configuration information on the tabs for the Gateway VL device as shown in the following
screens:

Advertising