ClearOne Musica Tools - Manual (Page 23)

Uploading/Downloading IR Commands
PN: 020002 4-3
All specifications subject to change without notification. All rights reserved. Copyright © 2006 NetStreams
Main +1 512.977-9393 / fax +1 512.977.9398 / Toll Free Technical Support +1 866-353-3496
3600 W. Parmer Lane, Suite 100; Austin, TX 78727 / www.netstreams.com.
Uploading IR Commands
To upload source IR commands to an ADC, complete the following steps:
1. Connect to a Musica system in the minimum configuration for uploading IR
commands (see Figure 2-10).
2. From the MusicaTools interface, select the UP PC -> ADC button in the lower left-
hand corner of the screen.
You are prompted to select a file to upload (see Figure 4-4).
Figure 4-4 Upload file prompt
3. Browse to the correct folder and double-click on the file name.
IR commands scroll through the monitor window on the MusicaTools interface as
the file loads into the ADC.
4. When IR commands no longer scroll in the monitor window, all commands are
loaded.