Monarch Instrument Navigator - Manual (Page 18)

Navigator Software User‟s Manual
Page 18 of 20
3.6.4 MEDIA
This option allows the user to format the CompactFlash™ card in the remote recorder. Use caution as this
can destroy data. You can check the content of the card using the File option below. You cannot format a
card while the recorder is in the record mode.
3.6.5
CONFIGURATION
This option allows the user to read, write, save, change or send a configuration. The configuration file,
designated by .CFG, is a copy of all the setups in the recorder. There needs to be a copy of the config file
saved on the recorder‟s memory card in order to read or change the configuration.
3.6.5.1 Read - Allows the user to download the configuration file from the recorder to the PC. You
will need to select the file from the file dialog box. Once the configuration file has been read
the configuration popup dialog box will open. To edit a file remotely ensure the Use Recorder
box is checked.
This is a representation of everything that is currently set up in the recorder. The parameters may be
edited and saved (back to the recorder). Check the recorder manual for setting details. Note: In order
to see the settings for Channel B, select “B” from the Channel pull-down menu.
Go to Contents