Monarch Instrument Navigator - Manual (Page 4)

Navigator Software User‟s Manual
Page 4 of 20
c) Click the Continue Anyway button and you will be asked to restart your computer.
d) Once your computer has been restarted, turn the recorder on and plug the USB cable into the unit
and your PC.
e) The “Found New Hardware Wizard” will launch.
f) Make sure the installation CD is still in the CD drive and select the “Yes, now and every time I
connect a device” option. Then click the Next> button.
g) Select the “Install the software automatically (Recommended)” option and click the Next> button.
h) The following Hardware Installation warning will appear.
i) Click the Continue Anyway button. When you are done click the Finish button to complete the
installation.
Note: You can check the successful installation by right clicking on the My Computer
icon in the Start menu and selecting Properties. Then choose the Hardware tab and
click the Device Manager button. You should see one instance of the recorder device under Ports (COM
& LPT) listed as 2 Channel Chart Recorder USB Bridge (COMx).
Go to Contents