Wheatheart Transfer Auger - Manual (Page 39)

W HEATHEART M ANUFACTURING - T RANSFER A UGER 6. M AINTENANCE
8”, 10”, & 13” 6.2. M AINTENANCE P ROCEDURES
IM2 R2 39
belts, loosen the over-center handle, motor mount clamp, and wheel
frame clamp. Slide each clamp toward the spout approximately 1/2" and
tighten nuts (see Figure 6.5). Test belt to ensure it no longer slips, repeat if
necessary.
Note: Refer to “Assembly” on page 15 for further details if required.