Wheatheart Self-Propelled Auger Kit (Wheatheart R Series) - Manual (Page 9)

W HEATHEART - S ELF -P ROPELLED A UGER K IT 2. S AFETY F IRST
W HEATHEART BH & R S ERIES 2.2. A SSEMBLY S AFETY
30761 R0 9
• Follow good shop practices:
• keep service area clean and dry
• be sure electrical outlets and tools are properly
grounded
• use adequate light for the job at hand
• Think SAFETY! Work SAFELY!
2.2. ASSEMBLY SAFETY
• Read the instructions and familiarize yourself with the subassemblies and
hardware making up the equipment.
• The components are large, heavy, and can be hard to handle. Be sure to use
the proper tools, stands, jacks, and hoists for the job.
• Have 2 people handle the heavy bulky components.
• Place safety stands or large blocks under the machine or components before
going beneath the component for assembly.
• Stay away from overhead power lines and obstructions when lifting the
machine during assembly. Electrocution can occur without direct contact.
Contact with obstructions can damage components or cause them to fail.
• Tighten all fasteners to their specified torque before using the machine.
)
2.3. OPERATION SAFETY
• Have another person nearby who can shut down the equipment in case of
accident.
• Do not operate with any of the safety guards removed.
• Keep body, hair, and clothing away from moving parts. Stay away from intake
during operation.