Canon BJC-620 - Manual (Page 84)

'LJLWDO  %,26 ,QVWUXFWLRQV
•
Press F2 to Enter Setup
•
Use up Arrow Key to Go to Top Toolbar
•
Use Right Arrow Key to Go to Advanced
•
Hit Enter on Advanced
•
3rd Item is Parallel Port Mode
•
Use Plus Key to Change From Compatible to Bi-directional
•
Hit Escape to Go to Main Menu
•
Select Save Changes and Exit
•
Notice Changes and Have Been Saved (continue)
*DWHZD\  3
•
Reboot Press F 1
•
Select Advanced Setup
•
Select Peripheral Configuration
•
Cursor to Parallel Port Mode
•
Press Enter
•
Select "ECP"
•
Press F10 to Save and Exit
*DWHZD\ 3HQWLXP  %,26 6HWXS
•
Press Fl to Enter Setup
•
Cursor Over to Peripheral Configuration
•
Hit Enter
•
Cursor Down to Parallel Port Mode and Hit Enter
•
Select ECP-EPP Mode
•
Hit Enter
•
Press Escape
•
Press F10 to Save and Exit
•
Select "Save Settings and Exit"
•
Hit Enter
*(1,6<6 3HQWLXP 6 %,26
•
After Rebooting, Press DEL to Enter Setup
•
Cursor Down to Chipset Features and Hit Enter
•
Cursor Down to Onboard Parallel Mode
•
Use PageUp key to Select ECP Mode
•
Press Escape
•
Press F10 to Save Settings and Exit
•
Press "Y" for Yes
•
Hit Enter