Amico AHM Monitor Arms (Adjustable Height) User Manual
Page 10
7
Amico Accessories
1. Ensure the V-adapter (or the D-Adapter) is in the UNLOCKED position, and ensure the AHM arm is LOCKED in the
highest vertical position.
2. Angle the adapters into the groove of the channel. Then straighten once inserted.
(Figure 4 and 5
)
3. Tighten screw knobs with a 3/16’’ Allen key when adapter is at desired height. Once tightened, the screw knob will
protrude from the other side. Fasten the nut to the screw to secure the adapter. Check all nuts and screw knob are
tightened to ensure V-adapter is locked.
(Figure 6)
V-adapter:
Silver adapter
(see Figure 1 and 2)
Dovetail adapter:
Black adapter
(see Figure 4 and 5)
(Figure 2)
Mounted on the VRS
(Figure 3)
Screw Knob
D-Adapter
AHM Arm
(Figure 4)
(Figure 5)
Mounting to the VRS (Vertical Rail System)
and the Ohmeda Rail
(Figure 1)
V-adapter
Screw Knob
AHM Arm