B&G V90 VHF Radio - Manual (Page 102)

102 |
Appendices | V90 Operating Manual
NAV
Hold down for about 1 second to enter Navigation mode, which
displays information about a destination waypoint on the standby
screen. For further information, see “Navigating to a waypoint” on
page 43.
3CH
Press to toggle between your three favorite channels. For further
information, see “Three favorite channels 3CH” on page 34.
Also used to zoom in the PPI screen. See page 71.
SCAN
See “Scanning channels” on page 34.
The SCAN key is also used as the button for a softkey in DSC mode.
See “Softkeys” on page 46.
Also used to zoom out the PPI screen. See page 71.
AIS
Press to enter AIS mode.
For AIS functionality, see “AIS procedures” on page 70.
For AIS setup, see “AIS setup” on page 91.
IC
Hold down [AIS/IC] until the Hailer menu appears. For further
information, see “Using the intercom” on page 39.
Alphanumeric keys
(Wired handset only). Used for entering numbers and names.
Shift keys
The V90 wired handset keypad includes a SHIFT key that modifies
the function of some keys.
• Press [SHIFT] to display the SHIFT icon, and then press the number
key to access the required function.
For a list of shift keys, see “Appendix 3 - Shift keys” on page 103.
Softkeys
A softkey is a name that appears at the bottom of the screen and
provides additional functionality to the [SCAN] and/or [OK] and/or
[3CH] keys during certain operations. For further information, see
“Softkeys” on page 46.