B&G V90 VHF Radio - Manual (Page 20)

20 |
Getting started | V90 Operating Manual
Keys
Some keys on the handsets have more than one function,
depending on what mode the radio is in. For example, [OK] for
accepting input and [H/L] for selecting high or low transmission
power are activated using the same key. To activate the lower
function on the key label, press and hold the key until the radio
responds.
A complete reference to keys is given in “Appendix 2 - Keys
reference” on page 100.
Softkeys
A softkey is a name that appears at the bottom of the screen, and
that can be selected using the [SCAN] and/or [OK] and/or [3CH]
keys during DSC operations.
Dot symbols on the handset keys and just under the display screen
indicate which keys correspond to the softkeys as follows:
• • • • • •
[SCAN] key [OK] key [3CH] key
In the illustration above, you would press [SCAN] for NEW-CH
(request new channel), or [OK] for ABLE (accept proposed channel).
The use of these keys is further explained in the DSC section of this
manual.
ROUTINE FROM
SUNBIRD
NO AUTO SW
CH09 REQUEST
01:15
A S U
C IS
NEW-CH ABLE
C
16
Hi
DSC
PRI